AT&T System 85 manual 371

8110 and 8110M Telephones

Message Light

The red Message light flashes when a message is left for the user. It goes off when the user retrieves the message. The Message light also serves as a visual ringing indicator by flashing quickly while the telephone is ringing.

Programmable Dialing Buttons

The 8110 and 8110M telephones provide 12 programmable dialing buttons on which the user can store frequently dialed telephone numbers or feature codes. Twenty elements can be stored on one button (digits and characters, such as a # or ∗ or Pause or Flash). To use these pre- programmed features, the user merely lifts the handset (the user may choose, instead, to press the SPEAKER button to turn on the speakerphone) and then press the appropriate programm- able dialing button.

PROGRAM and PAUSE buttons

Both of these buttons are used for storing numbers on the pre-programmed dialing buttons on the upper half of the faceplate of the telephone. The PAUSE button can be used to insert one or more one half-second pause/delay into a telephone number stored on a programmable dialing button or into a dialing access code in the (Redial) Auto-Pause feature.

Other Physical Features

Ringing

The 8110 and 8110M telephones have electronic tone ringing. The ringer volume control is a 3-position switch on the right side of the housing.

The user can also use a Tone Selector (labeled ‘‘LO HI’’) for selecting one of two tone ringer fre- quencies and a second Tone Selector (labeled ‘‘SLOW FAST’’) for selecting one of two tone ringer modulation rates. Both Tone Selector switches are on the right side of the telephone.

Mounting Options

The 8110 and 8110M telephones come equipped with a desk stand which can be turned upside- down and used for wall mounting the telephone.

3-371