AT&T System 85 manual Handset, Kneewell Adapter 602 Callmaster only

CALLMASTER® and CALLMASTER® II and III Voice Terminals

Handset

An optional K-type handset kit is available for the CALLMASTER voice terminals. This kit con- tains a handset cradle, a handset, and the required adapter. The handset plugs into the headset jack and functions as though a headset was being used. This handset does not provide switchhook capabilities.

Dial pad

The CALLMASTER voice terminals are equipped with a 12-button touch-tone dial pad.

Jacks

The CALLMASTER voice terminals’ housing contains three jacks. The mounting cord jack is located on the rear of the unit. Two PJ327 type (2-prong) jacks allow the headset or optional handset to be plugged into either side of the unit. The CALLMASTER II and III also have an Adjunct jack located on the back of the voice terminal.

Cords

A D8W-87 line cord (7 feet long) is provided with all CALLMASTER voice terminals.

Kneewell Adapter (602 CALLMASTER only)

An optional adapter is available for connecting two headsets or handsets to the

602 CALLMASTER. This adapter allows the handset or headset to be connected without the cords running across the top of the desk.

Ringing

The CALLMASTER voice terminals have electronic tone ringing with patterns that are set at administration.

Mounting Options

The CALLMASTER voice terminals are only available as a desk model. It cannot be wall mounted.

Color Options

The 602 CALLMASTER is available in black and misty cream. The CALLMASTER II and III sets are available in black, misty cream, and white.

3-306