AT&T System 85 manual Handset Features, Outside Line or Intercom/ Programmable Feature Buttons

MDC 9000 Cordless Telephone

Height = 3.43 inches

Handset Features

Fixed Feature Buttons

The MDC 9000 has the following eight fixed feature buttons:

CONFERENCE (labeled CONF) button

DROP button

(The DROP button is NOT labeled. It is located in the lower right corner of the LCD display.)

TRANSFER (labeled TRANS) button

HOLD button

FEATURE button (labeled FEAT)

(The FEAT button is not used.)

STATUS (labeled STAT) button

Headset On/Off button

(Handset) ON/OFF button

Outside Line or Intercom/ Programmable Feature Buttons

When labeled with an extension number, these buttons indicate lines used for incoming and out- going calls (call appearances) and for using the telephone as an intercom; when programmed and labeled with feature names, these buttons access features (feature buttons). In use, the light next to that button is lit; when a call is on hold, it winks.

STAT Button

The Status button (labeled STAT) is used to update all handset visuals if pressed when the STAT indicator appears (the handset is on), and to turn on the display when the handset is off.

(Handset) ON/OFF Button

This button is used for turning the handset on and off. (This button can also turn the headset on and off.)

3-462