AT&T System 85 manual Service Profiler ID Spid, 8528T Equipment PECs and Comcodes

ISDN 8528T Voice Terminal

The Service Profiler ID (SPID)

When ISDN terminals are initially installed, a unique SPID number must be entered into the ter- minal. This number identifies the terminal to the network. Usually, the system manager provides the SPID for each terminal in the system. Use the following procedure for entering the SPID in an ISDN 8528T terminal.

1.	Press	Menu	and then press Mute .
2.	Dial the numbers, ‘‘43’’ (ID).
3.	Press	* on the dial pad.
4.	Enter digits from the dial pad for a new SPID number. If, at any point, you make a mis-
	take, press		* to erase the number and re-enter the SPID.
5.	When the SPID number is correct, press # on the dial pad to save the new SPID in
	the terminal.

Power Failure Operation

The 8528T cannot be used as an emergency station during power failure transfer conditions.

FCC Registration

The 8528T voice terminal is FCC registered as a Class A terminal.

Hearing Aid Compatible

This terminal is compatible with the inductively coupled hearing aids as required by the FCC.

8528T Equipment PECs and COMCODES

The 8528T voice terminal and optional components can be ordered with the following Price Ele- ment Codes (PECs) and COMCODES:

ISDN 8528T Voice Terminal

PEC: 3xxx-001 (AT&T Black=COL09; AT&T White=COL10)

COMCODE: AT&T Black=107344509; AT&T White=107344517

3-454