AT&T System 85 manual 7410D and 7410 Plus Voice Terminals, Select Ring button on 7410D

7410D and 7410 Plus Voice Terminals

Features

Four Standard Fixed Feature Buttons

CONFERENCE or CONFERENCE/RING button

DROP or DROP/TEST button

TRANSFER button

HOLD button

Message Light

The Message light goes on when a message is left for the user. It goes off when the user retrieves the message. On the 7410D voice terminal, the Message light is green; on the 7410 Plus voice terminal, the Message light is red.

SELECT RING button (on 7410D)

On the 7410D (7410D01A) voice terminal has a SELECT RING button, which the user can press along with the ‘‘∗ ’’ key on the dial pad to select one of eight personalized ringing patterns. The SELECT RING button along with the DROP button is also used to perform a self-test of the lights and tone ringer on the voice terminal. The SELECT RING button has a green status light associ- ated with it.

SELECT button (on 7410 Plus)

The 7410 Plus (7410D02A) voice terminal has a SELECT button which can be used in two ways:

When used with the CONFERENCE/RING button, the user can select a personalized ring from eight ringing patterns.

When used with the DROP/TEST button, the user can initiate a self-test of the lights and ringer on the voice terminal.

Call Appearance/Feature Buttons

The 7410D and 7410 Plus voice terminals have 10 call appearance/feature buttons. Each of these buttons has a red in-use light and a green status light.

SPEAKER button (on 7410 Plus)

The 7410 Plus (7410D02A) voice terminal has a SPEAKER button which allows the user to place calls while on-hook, to monitor calls on which the user has been put on hold, or retrieve

3-200