FEATURES

High sensible cooling capacity.

The sensible cooling capacity has been significantly improved through balanced optimised heat exchanger design.

Labour saving installation.

The unit operation can commence immediately after connecting to the power supply, refrigerant piping, drain piping, ducting and control system.

Comfort heating. (PEH only)

The PEH series are designed to provide effective heating even when the outside temperature is down to -10 .

Highly efficient operation.

The EER(Energy Efficiency Ratio) on these models is greatly improved by revised design specifications and by being manufactured stringently to Mitsubishi Electric high quality standards.

Flexibility of Supply Air Delivery

PE, PEH-15,20 feature belt driven Supply Air fans enabling accurate matching of actual airflow rates to the specified quantities. Accurate commissioning is assisted by the capability to change pulleys and belts if necessary to achieve the desired air balance.

Low ambient cooling. (Special order)

In applications with relatively high internal loads, there may be a requirement for all series to operate on cooling at low ambient conditions. Special order parts is available to maintain the refrigeration circuit in balance at outdoor temperatures as low as -5 .

Please consult your local Mitsubishi Electric Sales office for application advice on these parts.

Wide electrical control capability.

All series is flexible mechanical control configuration.

In addition Global Remote Controller is prepared as special order.

The Global Remote Controller gives the programmable weekly timer, compressor anti-short cycle timer(3min.), cool/heat/fan/auto changeover etc.(Heat and auto changeover are only PEH.)

The factory standard is for provision of 24 volt terminal block to enable a field wired control of contractors choice to be connected.

Please consult your local Mitsubishi Electric Sales office for application advice on these control.

Grobal Remote Controller

DESCRIPTIONS

Mitsubishi Electric air conditioners series PE(H)/PU(H) are available in a wide range of sizes and models to enables the designer to select the best model for each application.

All series units are completely assembled, wired and strictly tested at the factory.

With the development of all series demands for such features as light weight, compactness,

increased capacity, appropriate static pressure, air flow control, and having flexibility of inter facing energy saving electronic controls, Mitsubishi Electric have met market expectations.

- 5-

Page 6
Image 6
Mitsubishi Electronics PEH-8MYA, PE-8MYC, PE-15MYC, PE-20MYC, PE-10MYC, PEH-10MYA, PE-7MYC, PEH-7MYA manual Features, Descriptions