Mitsubishi Electronics PE-8MYC Electric wiring, Arrangement such as terminal block in control box

6. Electric wiring

Construct the earth connection.

All electrical work must be carried out by a suitable qualified electrical trades-person and in accordance with local supply authority requirements and associated regulators.

The outdoor unit is to be wired directly from an electrical distribution board either by a circuit breaker (preferred) or HRC fuse.

Fix power source wiring to control box by using buffer bushing for tensible force (PG connection or the like). Connect control wiring to control terminal block through the knockout hole of control box using ordinary bushing.

NOTE: Earth wiring must be connected.

Arrangement such as terminal block in control box

Control module of indoor unit PEH-5, PE(H)-7, 8,10

Control module of indoor unit PE(H)-15, 20

Terminal block for connection wires to Outdoor unit and remote controller

PE(H)-7 only

PEH-15, 20 only

F1

30FZ

PEH only

Terminal block for power supply wires

C

Tr

TB3

FZ

F1

F2

30FZ

52F

&

51F1

Terminal block for connection wires to Outdoor unit and remote controller

Terminal block for power supply wires

	F1 3.15A
	Tr
FZ	F2 3.15A
TB3
	F2
CZ1-1
CZ1-2
TB2

PEH-15, 20	52F&51F1
PE-15, 20	52F1&51F1

TB2 HZ1 CZ1

Bush and band for the power supply

Screw for earth connection

PEH-15, 20	HZ1
PE-15, 20	FZ

Bush for the thermistor

Screw for earth

connection Bush and band for the connection wires to Outdoor unit and remote controller

Bush and band for
	Bush for the thermistor
the power supply

Bush and band for the connection wires to Outdoor unit and remote controller

Control module of outdoor unit (PUH-5, 8, 10)

Side blow

Screw for earth connection

Terminal block for power supply wires

T1	30CZ	X2	X3	51F2
F3
				52C
				&
				51C
		CZ2	HZ2
TB1
	TB4			X1

Terminal block for connection wires to Indoor unit

Band for wires

- 98 -