Mitsubishi Electronics PEH-15MYA, PE-8MYC, PE-15MYC, PE-20MYC, PE-10MYC manual PEH-5,7,8MYA Heat pump

PEH-5,7,8MYA									Heat pump
Model name				PEH-5MYA		PEH-7MYA		PEH-8MYA
Service				PEH-5MYA-EU		PEH-7MYA-EU		PEH-8MYA-EU
reference
Power supply	Indoor			3PH 4W380~415V 50Hz		1PH 2W220~240V 50Hz		3PH 4W380~415V 50Hz
	Outdoor			3PH 4W380~415V 50Hz		3PH 4W380~415V 50Hz		3PH 4W380~415V 50Hz
Total cooling capacity			kW	14.4		17.9		22.0
			Btu/h	49,150		61,100		75,100
			kcal/h	12,400		15,400		18,900
Sensible cooling capacity			kW	11.5		14.3		17.6
			Btu/h	39,400		48,800		60,100
			kcal/h	10,000		12,300		15,100
Sensible heating capacity			kW	14.4		18.8		22.0
			Btu/h	49,150		64,100		75,100
			kcal/h	12,400		16,200		18,900
Capacity step			%		0-100
Refrigerant						R-22
Refrigerant charge			kg	5.0		5.7		6.6
Refrigerant control						Capillary tube
Indoor Unit	Model name			PEH-5MYA		PEH-7MYA		PEH-8MYA
	Service			PEH-5MYA-EU		PEH-7MYA-EU		PEH-8MYA-EU
	reference
External finish						Galvanized steel
Dimension	Height		mm		428
	Width		mm	1,095				1,415
	Depth		mm		650
Net weight			kg	60		67		70
Indoor coil						Cross fin coil
Indoor fan						Centrifugal (Galvanized) - Direct drive
Indoor fan motor				Three phase induction motor		Single phase induction motor		Three phase induction motor
No. ✕ Motor output			kW	1 ✕ 0.45		1 ✕ 0.21		1 ✕ 0.7
Indoor fan air flow			CMM	42		60		70
			CFM	1,483		2,119		2,472
			L/S	700		1,000		1,167
External static			mmAq		12.5
pressure			Pa		125
Sound pressure level			dB(A)		55			56
Drain connection			mm		25.4
Outdoor unit	Model name			PUH-5MYE		PUH-7MYC		PUH-8MYC		PUH-8MYE
	Service			PUH-5MYE-EU		PUH-7MYC1-EU(S)	PUH-8MYC1-EU(S)			PUH-8MYE-EU
	reference
External finish						Acrylic resin coating
Color						Munsell 5Y 8/1
Dimension	Height		mm	1,175		980				1,175
	Width		mm	1,000		1,400				1,250
	Depth		mm	550		700				550
Net weight			kg	150		211		214		188
Compressor						Hermetic line start(reciprocating)
No. ✕ Motor output			kW	1 ✕ 3.73				1 ✕ 5.5
Outdoor coil						Cross fin coil
Outdoor fan						Propeller-Direct drive
Outdoor fan motor						Three phase induction motor
No. ✕ Motor output			kW	1 ✕ 0.15		2 ✕ 0.09				1 ✕ 0.35
Outdoor fan air flow			CMM	95		167				200
			CFM	3,355		5,898				7,063
			L/S	1,583		2,783				3,333
Sound pressure level			dB(A)	57		65				65
Protection devices				High pressure switch, freeze & frost protection, Fuse
				Over current relay (comp & indoor fan, outdoor fan)
				Internal thermostat (comp & indoor fan, outdoor fan)
Note 1. Cooling and heating capacities are based on the following conditions.
Cooling		indoor; 27˚CDB, 19˚CWB, outdoor :35˚CDB
Heating		indoor; 21˚CDB,		outdoor :7.0˚CDB, 6.0˚CWB

Cooling and heating capacities are based 5m pipe length.

2.Refergirant charge volumes are factory charged (at 5m piping length).Refrigerant is enclosed with the outdoor unit.

3.Capacity is gross capacity which do not include a deduction for evaporator fan motor heat.

4.The measuring point of the Sound pressure level is 1m from the unit surface.

5.Specification subject to change without notice.

- 9 -