Polycom s640, BPX100, GCN100, DCX200, DCX100, BPN100, s340, 72-1004-01, GCX100, DCN200 manual Battery Packs

Models: 72-1004-01 GCX100 BPX100

1 50
Download 50 pages 7.7 Kb
Page 27
Image 27
Battery Packs

SpectraLink Corporation

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Battery Packs

Overview The handset will need to have its Battery Pack recharged periodically. The Nickel Metal Hydride (NiMH) rechargeable handset Battery Pack gives you four hours of talk time or 80 hours of stand-by time (unless PTT is enabled in the NetLink i640 Wireless Telephone only). Stand-by time is when the handset is turned on, but not in an active call.

Indications of low battery The handset will notify you when the charge on the Battery Pack is low by displaying the battery icon. If you are in a call you will hear a soft beep through the earpiece every thirty seconds. User has 15–30 minutes of battery life left. The alerts will increase to every six seconds when there is about one minute of battery life left.

Not in call: The message Low Battery and a loud beep indicate a critically low Battery Pack charge. These occur when the user is not in a call. The handset will not work until the Battery Pack is charged.

Caution: Take care not to short the battery contacts on the Battery Pack with metal objects such as coins, keys or paper clips. Shorting the contacts can cause permanent damage.

NetLink e340, h340 Battery To remove, press down on the latch on the Battery Pack on the Pack removal and replacement back of the handset. The Battery Pack releases outward.

To replace, slide the lip of the Battery Pack into the bottom of the cavity. Push the top of the Battery Pack until it snaps into place. You should not have to force it against the handset.

NetLink i640 To remove, hold the handset in one hand with the keypad facing Battery Pack removal and up. Press both Battery Pack release buttons (on the left and right

replacement sides of the handset) at the same time. The Battery Pack will release downward. You may catch it with the palm of your other hand. If the Battery Pack does not release, gently shake the handset while pressing both release buttons. Do not pry.

To replace, slide the Battery Pack straight into the cavity until it snaps into place. You should not have to force it against the handset.

Changing the Battery Pack while If you are using the NetLink Telephony Gateway, the Battery Pack in a call may be changed while the call is still in progress. Do not press End

Call on the handset. Quickly remove the discharged Battery Pack and replace with a charged Battery Pack, then press Power On to turn the handset back on. Press Start Call to resume the call in progress.

Battery Pack note Battery Packs are not interchangeable. The NetLink i640 Wireless Telephone uses the distinctive square model BPX100 Battery Pack. The Battery Packs for the NetLink e340 and h340 Wireless Telephones are the same rounded shape but different colors. The NetLink e340 model BPE100 Battery Pack is black; the NetLink h340 model BPN100 Battery Pack is steel blue.

Part Number: 72-1004-01-J.doc

Page 27

Page 27
Image 27
Polycom s640, BPX100, GCN100, DCX200, DCX100, BPN100, s340, 72-1004-01, GCX100, DCN200, DCE200 manual Battery Packs