Polycom DCX100, BPX100, GCN100, DCX200, BPN100, s640, s340, 72-1004-01 number on any line appearance

SpectraLink Corporation NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

number on any line appearance.

Transfer In order to transfer an active call, press FCN 1. This places the call (Local) on hold and gives you a dial tone for a second call on the same line

appearance. Dial the number that you want to forward the call to and then press FCN 1 again. The dialed number is called and your call is disconnected. This is a blind transfer. For a consulted transfer, press FCN 1, dial the number, and then press the Dial softkey. When the party answers, have your conversation and then press FCN 1 to transfer the held call and disconnect the first call.

If the second call on the active line appearance is already in use, a consulted transfer is made to the party on that call. Press FCN 1 to place the first call on hold and converse with the second call. Press FCN 1 again to transfer the held call and disconnect both calls.

Do not disturb Activate the do-not-disturb feature to reject all incoming calls with a (Local) busy indication by pressing FCN 2. The handset will not ring for

new incoming calls. Press FCN 2 again to resume ringing.

When the do-not-disturb feature is enabled, the standby screen will display Do Not Disturb.

Voicemail When the voicemail icon displays dial the number assigned to message retrieval and follow system instructions to retrieve messages.

Alternately, if configured, the voicemail system can also be accessed by pressing the Msg softkey, which will appear after selecting a line and before beginning to dial.

The LINE menu will display a plus (+) indication when there is a new voicemail for that line. Indications are cleared when the handset receives notification that all new voicemail messages have been read.

Part Number: 72-1004-01-J.doc Page 47