SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco
Connecting via telnet
Telnet can only be used after the SVP Server’s IP address is configured.
The telnet method of connection is used for routine maintenance of the SpectraLink Server for both local and remote administration, depending on your network.
To connect via telnet, run a telnet session to the IP address of the SVP Server. Once you connect and log in, the NetLink
The NetLink SVP-II System Menu
The main menu displays as shown here:
System Status
Menu for viewing error messages, status of operation and software code version.
24 | PN: |
