SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco
•IP Address: The IP address of a network TFTP server that will be used to transfer software updates to the SVP Server.
DNS server and DNS domain
These settings are used to configure Domain Name services. Consult your system administrator for the correct settings. These can also be set to DHCP. This will cause the DHCP client in the SVP Server to attempt to automatically get the correct setting from the DHCP server. The DHCP setting is only valid when the IP address is also acquired using DHCP.
WINS servers
These setting are used for Windows Name Services. Consult your system administrator for the correct settings. These can also be set to DHCP. This will cause the DHCP client in the SVP Server to attempt to automatically get the correct setting from the DHCP server. The DHCP setting is only valid when the IP address is also acquired using DHCP.
When the name services are set up correctly, the SVP Server can translate hostnames to IP addresses. Using telnet, it is also possible to access the SVP Server using its hostname instead of the IP address.
Workgroup
As set in WINS.
Syslog Server
Logging can be set to Syslog or NONE. If Syslog is set, a message is sent to the syslog server when an alarm is triggered.
Disable Telnet Service
Prevents Telnet access into the SVP Server. Reset the SVP Server for the change to take effect. Upon reset the Telnet protocol server is not started.
The SVP Server must be reset in order to set the configuration options. If the SVP Server is in Maintenance Lock, you must manually reset it by
28 | PN: |
