SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco
SVP-II Mode
Defaults to NetLink IP for an IP environment. Press Enter to select and the screen is immediately redrawn with additional options for the IP environment.
The following options must be configured:
Phones per Access Point
AP specifications are detailed in the Configuration Notes for each brand and type. Refer to these notes when entering the number of simultaneous calls supported for your type.
802.11 Rate
Select 1MB/2MB to limit the transmission rate between the wireless telephones and APs. Select Automatic to allow the wireless telephone to determine its rate (up to 11 Mb/s).
30 | PN: |
