Configuring the SpectraLink 8000 SVP Server
SVP-II Configuration
Allows you to set the mode and reset the system.
Network Configuration
Allows you to set network configuration options, including IP address and hostname.
Change Password
Allows you to change the password for SVP Server access.
Network Configuration
The IP address and other network settings are established via the Network Configuration screen. This is also where you may optionally establish a hostname and enter the IP address of the location of any software updates you may obtain from Polycom. See Chapter 5 Software Maintenance for more information about installing software updates via TFTP.
Scroll to Network Configuration and select by pressing Enter. A screen similar to the following appears:
PN: | 25 |