SpectraLink 8000 SVP Server Overview
Notes on System Configuration
In an IP system using subnets to differentiate telephony areas, each subnet must have its own APs. Each subnet may require an SVP Server to maintain voice quality, but this depends on traffic volume and router capacity.
Multiple SVP Server environments are those which have more than one SVP Server. A master SVP Server must be identified in a
SVP Server models may not be combined within one subnet. More than one SVP Server model type may be used within a facility if installed on different subnets.
Wireless telephones cannot roam with uninterrupted service between subnets unless specific LAN components are present. Certain AP/Ethernet switch combinations establish a
Please see Best Practices for Deploying
IP multicast addresses are used when SpectraLink i640 and 8030 Wireless Telephones are installed. This requires that multicasting be enabled on the subnet used for the SpectraLink 8000 Wireless Telephones, SVP Server, and telephony gateways.
Routers are typically configured with filters to prevent multicast traffic from flowing outside of specific domains. The wireless LAN can be placed on a separate VLAN or subnet to reduce the effects of broadcast and multicast traffic from devices in other network segments.
The SVP Server requires a Cat. 5 cable connection between its network port and the Ethernet switch. The SVP Server auto- negotiates to the type of port on the Ethernet switch and supports
PN: | 13 |
