Porter-Cable RS830 REMOVING BLADE AND BLADE GUARD FROM SAW

10
REMOVING BLADE AND
BLADE GUARD FROM SAW
1. DISCONNECTMACHINE FROM POWER SOURCE.
2. Loosen blade guard clamp knob (A) Fig. 11, and
rotate blade guard (B)to the position shown.
Fig. 11
A
B
3. With wrenches (C) Fig. 12, loosen arbor nut (D) as
much as possible. NOTE: Arbor nut has left hand
threads.
Fig. 12
B
C
D
F
G
4. Lift cam (E) Fig. 13, which holds the blade guard (B)
Fig. 12, in position and move the blade guard (B), outer
blade flange (F), and blade (G) outward.
Fig. 13
E
5. Lift blade guard (B) Fig. 14, and remove arbor nut
(D), outer blade flange (F), and blade (G). Then remove
blade guard (B).
Fig. 14
B
G
F
D