Grounding Instructions

1.All grounded, cord-connected tools:

In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This tool is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances.

Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician.

Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment- grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment- grounding conductor to a live terminal.

Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the tool is properly grounded.

Use only 3-wire extension cords that have 3-prong grounding plugs and 3 pole receptacles that accept the tool's plug.

Repair or replace damaged or worn cord immediately.

2.Grounded, cord-connected tools intended for use on a supply circuit having a nominal rating less than 150 volts:

This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch A in Figure 1. The tool has a grounding plug that looks like the plug illustrated in Sketch A in Figure 1. A temporary adapter, which looks like the adapter illustrated in Sketch B and C, may be used to connect this plug to a 2 pole receptacle as shown in Sketch C if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet can be installed by a qualified electrician. This adapter is not applicable in Canada. The green-colored rigid ear, lug, and the like, extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box.

3.Grounded, cord- connected tools intended for use on a supply circuit having a nominal rating between 150 - 250 volts, inclusive.

This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch D in Figure 1. The tool has a grounding plug that looks like the plug illustrated in Sketch D in Figure 1. Make sure the tool is connected to an outlet having the same configuration as the plug. No adapter is available or should be used with this tool. If the tool must be reconnected for use on a different type of electric circuit, the reconnection should be made by qualified service personnel; and after reconnection, the tool should comply with all local codes and ordinances.

4.Permanently connected tools:

This tool should be connected to a grounded metal permanent wiring system; or to a system having an equipment- grounding conductor.

Figure 1

7

Page 6 Page 8
Page 7
Image 7
Powermatic 31A operating instructions Grounding Instructions, All grounded, cord-connected tools
Page 6 Page 8

31A specifications

The Powermatic 31A is a high-performance 12" planer that has become a favorite among woodworkers and craft enthusiasts alike. Renowned for its powerful features and robust design, the 31A stands out in the woodworking community for its ability to deliver precision and efficiency in planing wood.

One of the key features of the Powermatic 31A is its 3 HP motor, which provides ample power for handling a wide range of hardwoods and softwoods. The motor is designed to run smoothly and quietly, reducing vibration during operation, which is essential for achieving fine finishes. The combination of power and stability allows users to tackle even the most challenging jobs with ease.

The machine is equipped with a 12" wide cutter head that utilizes four high-speed steel knives, which are known for their superior cutting capabilities. This allows for a smooth, even finish and reduces the amount of sanding required afterward. The adjustable infeed and outfeed tables are another notable feature, providing support for long workpieces and ensuring accuracy throughout the planing process.

In addition to its mechanical prowess, the Powermatic 31A boasts a quick elevation mechanism that allows users to make rapid adjustments to the height of the cutter head. This feature enhances efficiency and allows for easy transitions between different thicknesses of wood. The inclusion of a hinged cover also allows for quick access to the cutter head for maintenance and knife replacement, minimizing downtime.

The built-in dust collection system is another notable characteristic of the Powermatic 31A. This system helps to keep the workspace clean and safe by efficiently removing sawdust and debris, thereby ensuring that the work environment remains tidy and reducing the risk of respiratory issues caused by wood dust.

Moreover, the heavy-duty cast iron construction of the Powermatic 31A enhances its stability during operation, contributing to a better cutting experience. The robust design also ensures longevity, making it a reliable choice for both professional woodworkers and hobbyists.

With precision engineering and advanced technologies, the Powermatic 31A melds power and functionality, making it an indispensable tool for anyone serious about woodworking. Whether you are milling lumber for furniture-making or crafting intricate wood designs, this planer delivers in performance, making it a top-tier choice in its class.
Top Page Image Contents