Specifications | Powermatic pm1000

6.0 Specifications

Model number	PM1000
Stock numbers:
Saw unit only, without Accu-Fence or rail system	1791000
Saw with 30” Accu-Fence and rail system	1791000K
Saw with 50” Accu-Fence and rail system	1791001K
Motor and electricals:
Motor type	totally enclosed fan cooled, induction, capacitor start
Horsepower	1-3/4 HP
Phase	single
Voltage	115/230V
Cycle	60Hz
Listed FLA (full load amps)	15/7.5 A
Motor speed	3450 RPM
Starting amps	74 A
Running amps (no load)	2.7 A
Start capacitor	300MFD, 125VAC
Run capacitor	70μF, 250VAC
Overload reset	manual push button on motor
Power transfer	poly v-belt
On/off switch	magnetic, push button with safety key
Motor speed	3450 RPM
Power cord	14 AWG, 6 ft. (183 cm)
Power plug installed	yes
Recommended circuit size1	20A
Sound emission	80 dB at 30 " (762 mm) from blade, without load

Arbor and blade*:
Blade diameter	10" (254mm)
Arbor diameter	5/8" (15.88mm)
Arbor speed	4200
Arbor lock	yes
Arbor wrench included	combination 17 / 27 mm
Maximum depth of cut at 90 degrees	3-1/8" (79 mm)
Maximum depth of cut at 45 degrees	2-1/8" (54 mm)
Maximum rip to right of blade	30" or 52"
Maximum rip to left of blade	12" (305 mm)
Dado maximum width	13/16" (20.6 mm)
Dado maximum diameter	8" (200 mm)
Blade height per one revolution of handwheel	19/64" (7.5mm) for 90°; 1/16" (1.7 mm) for 45°
Blade tilt	left, 0 to 45 deg.
*blade not included
Materials:
Main table	ground cast iron
Extension wings	ground cast iron
Trunnion	cast iron
Enclosed cabinet	steel
Table:
Main table dimensions	20" L x 27" W (508 x 686 mm)
Table dimensions with wings	40" L x 27" W (1016 x 686 mm)
Table area in front of blade at maximum height	10" (305 mm)
Table height from floor, approximate	34-1/4" (870 mm)
Miter T-slot	two at 3/4" W x 3/8" D (19 x 10 mm)
Edge bevel	front
Dimensions:
Cabinet footprint	23" W x 24-1/2" L (584 x 622 mm)
Overall dimensions of shipping carton (cabinet only)	30-1/2” L x 27-1/2” W x 43-3/4”H (77.5 x 70 x 111.4 cm)
Overall dimensions, fully assembled, accessories mounted:
with 30" rip	43" W x 61" L x 44" H (1092 x 1549 x 1117 mm)
with 52" rip	43" W x 83" L x 44" H (1092 x 2108 x 1117 mm)