6.0Unpacking
Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the sander is installed and running properly.
Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read this instruction manual thoroughly for assembly, maintenance and safety instructions.
6.1Contents of Shipping Container
1Sander
2Sanding belts (100 and 180 grit)
1Felt pad
1Graphite strip
1Tool box containing:
1 Door key
1 Platen pull hook
1 Adjusting rod
2 Limit switch tubes
1 Flat blade screwdriver
1 Cross point screwdriver
3
1Set of hex wrenches
1Owner's manual
1Warranty card
Read and understand the entire contents of this manual before attempting
8
