Installation
Mounting the UPS in a 23” RackUse the following procedure to install the UPS in a 23” rack configuration:
1.Place the UPS on a flat, stable surface with the front of the UPS facing toward you.
2.On each side of the UPS, attach the short end of a mounting bracket to the UPS using two of the supplied M3l 6 screws (see Figure 7).
Mounting Bracket
Rack Tray | M3 l 6 Bracket Screws |
Figure 7. Rack Tray and Mounting Bracket for a 23” Cabinet
NOTE Rails cannot be used for 23” cabinets. Confirm that you have a rack tray.
3.Slide the rack tray into the rack.
Powerware® 5115 | 23 |