C H A P T E R 6

COMMUNICATION

The Powerware 5115 RM has flexible communication options for local, network, or remote monitoring and management. You can use the USB port or the DB-9 communication port to connect your computer to the UPS. The X-Slot communication bay is also available for additional connectivity options.

NOTE Select only one method for communication. If an X-Slot card is installed, the USB and DB-9 ports are disabled. If an X-Slot card is not installed, be sure that only one port (USB or DB-9) is connected to the computer.

USB Port

The UPS can communicate with a USB-compliant computer using

LanSafe Power Management Software (v4.15 or higher).

To establish communication between the UPS and a computer:

1.Connect the USB cable to the USB port on the UPS rear panel.

Connect the other end of the USB cable to the USB port on your computer.

USB Port

Figure 18. The USB Port

2.Install the LanSafe software and USB drivers according to the instructions provided with the Powerware Software Suite CD.

Powerware® 5115 Rack-Mount User’s Guide : 164201449 Rev A www.powerware.com

35