Installation

Wall-Mount Setup

Use the following procedure to mount the UPS to a wall:

1.Place the UPS on a flat, stable surface with the front of the UPS facing toward you.

2.Attach four mounting brackets to the UPS as shown Figure 10.

Secure the short end of the mounting bracket to the UPS using two of the supplied M3￿l 6 screws.

W A R N I N G

The UPS MUST be positioned with the front panel at the top to prevent a battery hazard.

3.Secure the UPS to the wall using one bolt in each mounting bracket as shown. Select the bolt according to the wall type.

Wall

Figure 10. Mounting the UPS to a Wall

26

Powerware® 5115 Rack-Mount User’s Guide : 164201449 Rev A www.powerware.com