C H A P T E R 3
INSTALLATION
This section explains:
SEquipment inspection
SUPS installation
SUPS rear panels
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with the carrier within 15 days of receipt of the equipment; 2) Send a copy of the damage claim within 15 days to your service representative.
Installing the UPS
The following steps explain how to install the UPS. Figure 2 shows a typical installation only. See “UPS Rear Panels” on page 20 for the rear panel of each model.
NOTE Do not make unauthorized changes to the UPS; otherwise, damage may occur to your equipment and void your warranty.
1.If installing an optional EBM, continue to Step 2; otherwise, skip to Step 4.
2.Plug the EBM cable into the battery connector on the UPS rear panel (see Figure 2).
3.If a second EBM is to be installed, plug the EBM cable of the second cabinet into the battery connector on the first EBM. Up to four EBMs may be connected to the UPS.
Powerware® 5125 Tower | 17 |