Additional UPS Features

Network Transient Protector

The Network Transient Protector, shown in Figure 16, is located on the rear panel and has jacks labeled IN and OUT. This feature accommodates a single RJ-45 (10BaseT) network connector.

Low voltage models can also accommodate an RJ-11 telephone connector that provides protection for modems, fax machines, or other telecommunications equipment. As with most modem equipment, it is not advisable to use this jack in digital PBX (Private Branch Exchange) environments.

Connect the input connector of the equipment you are protecting to the jack labeled IN. Connect the output connector to the jack labeled OUT.

Out

In

Figure 16. Network Transient Protector

Powerware® 5125 Tower (1000–2200 VA) User’s Guide S Rev B www.powerware.com

31