Powerware 5125 Turning the UPS Off, Initiating the Self-Test

Operation

Turning the UPS Off

To turn off the UPS, press and hold the Off button until the long beep ceases (approximately five seconds). The µindicator begins to flash and the UPS remains in Standby mode until you unplug the UPS from the power outlet.

Initiating the Self-Test

NOTE The batteries must be fully charged to perform the self-test.

Press and hold the button for three seconds to initiate the self-test. During the test, individual indicators illuminate as various parts of the UPS are checked. If the alarm beeps or a UPS alarm indicator stays on, see Table 9 on page 44.

28 Powerware® 5125 Tower (1000–2200 VA) User’s Guide S Rev B www.powerware.com