Installation

8. Press and hold the On button until you hear the UPS beep (approximately one second). The µindicator stops flashing and the bar graph indicators display the percentage of load being applied to the UPS.

The UPS is now in Normal mode and supplying power to your equipment.

NOTE The batteries charge to 90% capacity in approximately 3 hours. However, it is recommended that the batteries charge for 24 hours after installation or long-term storage.

NOTE If more than two EBMs are installed, an external battery charger is recommended for faster recharge times.

Powerware® 5125 Tower (1000–2200 VA) User’s Guide S Rev B www.powerware.com

19