Precor P/N 300753-201 manual Performing the Assembly, Required Tools, To begin assembly

Assembling the EFX 19

Required Tools

#2 Phillips screwdriver

Rubber mallet

SAE standard hex wrench set

SAE standard socket set

Two ⁹₁₆-inch wrenches (open-end and box-end)

Wire cutter

Performing the Assembly

DANGER Do not attempt to connect electrical power until all assembly procedures are complete and the console is properly installed.

As you assemble the EFX, make sure to construct the cable assembly as directed so that the necessary connections are accessible when you add the console.

To begin assembly:

1.Remove the lift cover and set it aside.

Important: Grease on the lift screw can stain clothing. Be careful not to get grease on your clothing as you remove the lift cover. Do not remove the grease from the lift screw, because it is required for proper operation.

Figure 2: Lift cover removal