Precor P/N 300753-201 To attach the water bottle holder, To attach the upright support covers

30Assembling and Maintaining Elliptical Fitness Crosstrainers: EFX 883 / 833 / 823

To attach the water bottle holder:

1.Position the water bottle holder as shown and attach it to the right stationary handlebar.

Figure 19: Water bottle attachment

2. Secure the holder using three Phillips-head screws.

To attach the upright support covers:

1.Place one inner and one outer upright support cover around one of the upright supports, aligning them so that the arrows on their inside surfaces point toward the front of the equipment.

2.Line up the protrusions on the outer cover with the screw holes on the inner cover.

3.Apply pressure to both covers so that the protrusions fit firmly into the screw holes.

4.Secure the upright support covers using two self-tapping screws.

Figure 20: Upright support cover attachment (right-hand cover shown)