Mounting the Brackets to the Display
The following steps will require a minimum of 3 people. This should not be done with less then 3 people due to the weight of mounting brackets.
Left Mounting
Bracket
Right Mounting
Bracket
Split Washer
M16 Bolt
Step 1. Align the mounting bracket holes up with the mounting holes on the back of the display. There are two mounting holes used on each side of the display.
Step 2. Place the split washer between the display and the mounting bracket.
Step 3. Insert the M16 mounting bolt through the mounting bracket then through the split washer into the display. Step 4. Tighten the bolt into place and repeat the steps for the remaining three bolts.
DO NOT OVERTIGHTEN THE M16 BOLTS. DOING SO MAY RESULT IN DAMAGE TO THE DISPLAY. TIGHTEN TO MANUFACTURERS SPECIFICATIONS.
Installation Instructions | Page 5 |
