Pasta Dispensers, Romar Pasta Cooker, Loading, Cover

Romar Pasta Cooker

630-ROM4

Pasta Dispensers

	1
	1			The Pasta Dispenser assembly is composed of
				three removable parts: one hopper, one hopper
				cover and one loading box. No tools are needed to
				assemble these parts.


				The Pasta Dispenser is a precision machine and
				should be handled with care.

				Lift the cover from the Pasta Dispenser assembly and
				slide the cover down inside the loading box as shown.

Box

Cover

Box

	2			A. Fill loading box with approx. 1 lb. of long-cut
	2			pasta.
				B. Fill hoper with up to 14 lbs. of the same long-cut
				pasta.

				Use only pasta recommended by Prince Castle.
				Using other types of pasta or food may cause
				severe damage and void all warranties and
				maintenance contracts.

Box

Hopper

A.Remove the loading box cover, allowing pasta to fall into the hopper.

B.Place loading box cover firmly on top of loading box.

The long-cut Pasta Dispenser is now ready for use.

It is recommended that you keep the hopper supplied with at least two pounds of pasta at all times.

Box

Fill each of the two short-cut past dispensers with up to 14 lbs. of pasta.

The short-cut Pasta Dispensers are now ready for use.

Procedure Complete

630-500