Printek Mt3-II manual Installing the Battery Cartridge, Getting Started, Battery Disposal

Getting Started

•The recommended room temperature for charging is between 68°F (20°C) to 77°F (25°C).

•The battery storage temperature is 40°-104°F (4°-40°C). Do not store a fully charged battery at temperatures greater than 104°F (40°C) for long periods of time – the battery may permanently lose charge capacity.

•Be sure to use a fully charged battery before long or battery intensive printing sessions. Certain operations (for example, printing receipts with a lot of bar codes and graphics) drain the battery more quickly than others.

Caution: Do not disassemble, short circuit, heat above 80°C, or incinerate. The battery may explode.

Battery Disposal

Only dispose of used batteries according to your local regulations. If you do not know your local regulations, the Rechargeable Battery Recycling Corporation (RBRC) is a non-profit organization created to promote recycling of rechargeable batteries. For more information visit www.rbrc.org.

Installing the Battery Cartridge

One battery cartridge is included with the printer. Similar to a cordless phone battery, the printer’s battery must be charged before using it.

Refer to the following picture to install the battery pack in the printer.

1.Unlock the battery door by sliding the battery door release toward the center of the door, and open the battery door.

4