Operation
Reading the Indicator Status
MCR
Error Battery Power
Indicator |
| State | Status |
|
|
|
|
Power: |
| Green | Printer is on and ready to receive data via the |
|
|
| port or the IrDA interface. |
|
|
| When using |
|
|
| turn the printer on. After approximately 20 seconds, if no |
|
|
| instructions are sent, the printer will automatically turn |
|
|
| off to conserve battery life. |
|
|
| When using IrDA, the printer will stay on all the time. |
|
|
| Pressing the On/Off button again will turn the printer off. |
|
|
|
|
|
| Blue | Printer is on and ready to receive data via either the |
|
|
| Bluetooth or |
|
|
|
|
|
| Yellow | Low power. Battery needs to be recharged. |
|
|
|
|
Battery: |
| Yellow | The battery charger is charging the battery at a fast rate. |
|
|
| If the battery is below 5.0V, the battery is being “trickle” |
|
|
| charged until the battery voltage reaches 5.0V, and then |
|
|
| the fast charge rate is started. The indicator will turn Off |
|
|
| when the battery is fully charged. |
|
|
|
|
Error / MCR: | / | Green | MCR is ready to accept data. |
|
|
| |
| Red | Red Indicates a fault condition or a printer error. The | |
|
| printer is not ready to accept data. | |
|
| Refer to the troubleshooting guide to determine error or | |
|
|
| fault condition. |
|
|
|
|
9
