.

.

The Console (4) can use four 1.5V "D" batteries

(not included); alkaline batteries are recom- mended. IMPORTANT: If the Console has

been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the screws, remove the battery cover, insert the batteries into the bat- tery compartment, and then reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment.

To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer-supplied AC

adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances.

While a second person holds the Console (4) near the Upright (2), connect the console wire to the Wire Harness (100).

Tip: Do not pinch the wires. Attach the Console (4) with four M4 x 16mm Flat Head Screws (94).

',' C ver

Batteries

4

Batteries

Scre

Console

Do not pinch

 

the wires during

94

this step

 

94

8

Page 36
Image 36
ProForm 831.23844.0 user manual Do not pinch Wires during This step