9.Attach the Left Pedal (12) to the left Pedal Arm

(14)with three M10 x 70mm Patch Screws (75), three M10 Split Washers (78), and an M4 x 16mm Screw (84).

Repeat this step for the other side of the elliptical exerciser.

10.Apply a small amount of grease to two Wave Washers (88) and to the axles on a Pedal Arm Axle (21).

Identify an Upper Body Leg Spacer (113), which has a curved side. Slide a Wave Washer (88) and the Upper Body Leg Spacer onto the indi- cated axle of the Pedal Arm Axle (21); make sure that the curved side of the Upper Body Leg Spacer is facing away from the Pedal

Arm Axle.

Identify a Pedal Leg Spacer (114), which has a flat side. Slide a Wave Washer (88) and the Pedal Leg Spacer onto the other axle of the Pedal Arm Axle (21); make sure that the flat side of the Pedal Leg Spacer is facing away from the Pedal Arm Axle.

Repeat this step for the other Pedal Arm

Axle (not shown).

9

/

10

CurvedGrease

113

88

Flat Side

Grease

10

Page 38
Image 38
ProForm 831.23844.0 user manual Arm Axle