![](/images/new-backgrounds/1298229/29822915x1.webp)
.
.
The Console (4) can use four 1.5V "D" batteries
(not included); alkaline batteries are recom- mended. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it to warm to room temperature before insert- ing batteries. Otherwise, you may damage the console displays or other electronic components. Remove the screws, remove the battery cover, insert the batteries into the bat- tery compartment, and then reattach the battery cover. Make sure to orient the batteries as shown by the diagram inside the battery compartment.
To purchase an optional AC adapter, contact the store where you purchased this product or call the telephone number on the cover of this manual. To avoid damaging the console, use only a
adapter. Plug one end of the AC adapter into the jack on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances.
While a second person holds the Console (4) near the Upright (2), connect the console wire to the Wire Harness (100).
Tip: Do not pinch the wires. Attach the Console (4) with four M4 x 16mm Flat Head Screws (94).
',' C ver
Batteries
4
Batteries
Scre
Console
Do not pinch |
|
the wires during | 94 |
this step | |
| 94 |
8