ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly | requires the included | tools and your own Phillips screwdriver _, | adjustable | |
wrench _, | and rubber | mallet | R |
|
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parenthe- ses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. If a part is missing, call
M6 Nylon | M6 Large | Wave Washer | MIO Split |
Locknut | Washer | Washer |
M4 x 16mm | M4 x 16mm Flat Head | M4 x 32mm Screw |
Screw | Screw |
M6 x 16mm Patch | M6 x 38mm Button | M10 x 20mm Patch |
Screw | Bolt | Screw |
M10 x 41mm Shoulder | M10 x 70mm Patch Screw |
Patch Screw |
|
5
