5. Next, insert the brackets on the Handrail (110) | 5 |
|
into the Uprights (91, 92). Make sure that no |
| |
wires are pinched. | Console |
|
| Assembly |
|
| 110 | 91 |
|
| 110 |
|
| 92 |
6. Partially tighten three 3/8" x 1 1/4" Patch Bolts | 6 |
|
(2) with three 3/8" Star Washers (6) into the |
| |
Right Upright (92); do not fully tighten the |
|
|
Patch Bolts yet. | 91 |
|
Repeat this step with the Left Upright (91). |
| |
Then, firmly tighten all six 3/8" x 1 1/4" Patch |
| 2 |
Bolts (2). |
| |
|
| 6 |
|
| 92 |
| 2 | 6 |
7. Slide the Right Upright Sleeve (90) up against | 7 |
|
the console assembly. Attach the Right Upright |
| |
Sleeve with two #8 x 3/4" Tek Screws (24). |
| Console |
Attach the Left Upright Sleeve (not shown) to |
| |
the console assembly in the same way. |
| Assembly |
|
| 90 24 |
| 24 |
|
9
