ProForm PFANSY9825.1 user manual Repeat this step with the other Press Arm

16.Attach the Leg Bumper (59) to the Right Seat Frame (3) with an M4 x 16mm Self-tapping Screw (89) and an M4 Washer (96).

Grease an M10 x 75mm Bolt (60). Attach the Leg Lever (4) to the Right Seat Frame (3) with the Bolt and an M10 Nylon Locknut (90). Make sure the “U”-rod is on the indicated side of the Leg Lever. Do not overtighten the Locknut; the Leg Lever must be able to pivot easily.

17.Grease an M10 x 108mm Bolt (72). Orient the Press Frame (29) so that the welded tube is on the side toward the Left Upright (26). Attach the Press Frame to the Left Base (25) with the Bolt and an M10 Nylon Locknut (90). Do not over- tighten the Locknut; the Press Frame must be able to pivot easily.

18.Attach a Press Handle (32) to a Press Arm (30) with an M10 x 65mm Bolt (77), two M10 Washers (99), two M10 x 12mm Spacers (101), and an M10 Nylon Locknut (90).

Attach a Press Arm Cap (34) to the Press Arm

(30)with an M10 x 45mm Button Bolt (81) and an

M10 Large Washer (100).

Repeat this step with the other Press Arm (30).

16		90
			Grease
	4	89	60
		96 59
		3
	“U”-rod
17
	Tube
		29
26		Grease
	90	72
		25
18
	81
	100
	34	32
			30
90	99
		30
	101
	101
	99	77

11