9.Slide two Weight Bumpers (45) onto the Weight Guides (44). Slide the eight Weights (55), with the pin holes on the indicated side, onto the Weight Guides.
Press the Weight Tube Bumper (46) into the Weight Tube (47). Insert the Weight Tube into the stack of Weights (55). Make sure the pin on the
Weight Tube sits in the groove in the top Weight.
Grease the indicated holes in the Top Weight (56) with an included grease pack. Slide the Top Weight onto the Weight Guides (44).
10.Attach the Right Top Frame (5) to the Right Upright (2) with two M8 x 78mm Bolts (82), two M8 Washers (98), and two M8 Nylon Locknuts (91). Do not tighten the Locknuts yet. Make sure the Weight Guides (44) are behind the Right Top Frame.
11.Attach a Weight Guide (44) to the Right Top Frame (5) with an M8 x 78mm Bolt (82), two M8 Washers (98), and an M8 Nylon Locknut (91). Do not tighten the Locknut yet.
Repeat this step with the other Weight Guide (44).
9
9 | 44 |
|
|
56 | Grease |
| |
47 | Pin |
|
|
|
|
| |
Groove | 46 |
|
|
|
|
| |
|
| 55 |
|
45 |
| Pin |
|
45 | Holes |
| |
|
| ||
|
|
| |
10 |
|
|
|
82 |
|
|
|
98 |
|
|
|
98 |
|
|
|
5 |
|
|
|
91 |
|
|
|
91 |
| 44 |
|
44 |
|
| |
2 |
|
|
|
11 |
|
| 82 |
|
|
| |
5 |
|
| 98 |
|
|
| 98 |
|
|
| 91 |
| 44 |
| 44 |
