ProForm PFANSY9825.1 user manual 107

50. Wrap the Ab Cable (107) under a 90mm Pulley	50	90		107
(63). Attach the Pulley, a Cable Trap (68), and			66
two Half Finger Guards (66) to the Right Base (1)				63
with an M10 x 50mm Bolt (64) and an M10 Nylon
				1
Locknut (90). Make sure the Cable Trap and
Finger Guards are oriented as shown.				68
				66
				64
51. Wrap the Ab Cable (107) over a 90mm Pulley	51
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) at the second hole
from the bottom of the two Pulley Plates (51) with
an M10 x 50mm Bolt (64) and an M10 Nylon				66
Locknut (90). Make sure the Cable Trap and				64	51
Finger Guards are oriented as shown.
				68	90
				63
				107	66
52. Wrap the Ab Cable (107) under a 90mm Pulley	52	90		107
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) to the Right Base (1)		66		63
with an M10 x 50mm Bolt (64) and an M10 Nylon		68
Locknut (90). Make sure the Cable Trap and
Finger Guards are oriented as shown.
				1	64
				66
53. Wrap the Ab Cable (107) over a 90mm Pulley	53			66 90
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) to the lower hole in				50
the indicated “U”-bracket (50) with an M10 x			66
50mm Bolt (64) and an M10 Nylon Locknut (90).		64
Make sure the Cable Trap and Finger Guards
are oriented as shown.				68
				63
				107
54. Wrap the Ab Cable (107) under a 90mm Pulley	54	90
(63). Attach the Pulley, a Cable Trap (68) and two
Half Finger Guards (66) to the Right Base (1) with		66
an M10 x 50mm Bolt (64) and an M10 Nylon
Locknut (90). Make sure the Cable Trap and
Finger Guards are oriented as shown.
			107		66
		1		63	64
				68

19