ProForm PFANSY9825.1 user manual Identify the Ab Cable 107. Route the small ball

46. Identify the Ab Cable (107). Route the small ball	46
on the Cable through the Leg Lever (4) and the		3
Right Seat Frame (3). Make sure the Cable is	4
over the rod in the Seat Frame.		63
	90
Attach a 90mm Pulley (63) inside the Leg Lever	101
(4), over the Ab Cable (107), with an M10 x	99
65mm Bolt (77), two M10 Washers (99), two M10	Large
x 12mm Spacers (101), and an M10 Nylon	Ball	Rod
Locknut (90).	107	99
		77
		101
47. Attach a 90mm Pulley (63) inside the Right Seat	47
Frame (3), over the Ab Cable (107), with an M10
x 45mm Bolt (80) and an M10 Nylon Locknut
(90).	90	63
		3
	107
		80
48. Route the Ab Cable (107) through the Right	48
Upright (2) and under a 90mm Pulley (63). Attach
		90 66
the Pulley and two Half Finger Guards (66) to the
		63
Right Base (1) with an M10 x 50mm Bolt (64) and
an M10 Nylon Locknut (90). Make sure the		66
Finger Guards are oriented as shown.
	107	64
		1
	2
49. Wrap the Ab Cable (107) over a 90mm Pulley	49
(63). Attach the Pulley, a Cable Trap (68), and
two Half Finger Guards (66) to the lower hole in
the indicated “U”-bracket (50) with an M10 x	90	66
50mm Bolt (64) and an M10 Nylon Locknut (90).		50
Make sure the Cable Trap and Finger Guards		66
are oriented as shown.
	68	64
		63
		107
	18