19. Attach a Press Arm (30) to the Press Frame (29) | 19 |
| |
with two M8 x 69mm Bolt (86) and two M8 Nylon |
| ||
|
| ||
Locknuts (91). |
|
| |
Repeat this step with the other Press Arm |
|
| |
(30). |
|
| |
|
| 30 | |
|
| 86 | |
|
| 30 | |
|
| 91 | |
|
| 29 | |
20. Grease an M10 x 108mm Bolt (72). Attach the | 20 |
| |
Leg Press Frame (28) to the Left Base (25) with |
| ||
|
| ||
the Bolt and an M10 Nylon Locknut (90). Do not |
|
| |
overtighten the Locknut; the Leg Press Frame |
|
| |
must be able to pivot easily. |
| 28 | |
|
| 90 | |
|
| 25 | |
|
| 72 | |
21. Grease an M10 x 77mm Bolt (76). Attach the | 21 | 90 | |
Foot Plate (38) to the Leg Press Frame (28) with | |||
| Grease | ||
the Bolt and an M10 Nylon Locknut (90). Make |
| ||
| 76 | ||
sure the decal on the Foot Plate is right side |
| ||
|
| ||
up. Do not overtighten the Locknut; the Foot |
|
| |
Plate must be able to pivot easily. |
|
| |
|
| 38 | |
|
| 28 | |
Cable Assembly | 22 |
| |
|
| ||
|
| 28 | |
22. See the CABLE DIAGRAMS on pages 26 and |
|
| |
27 to identify the cables and to assemble the |
| 91 | |
cables correctly. |
|
| |
Identify the Press Cable (109). Attach the Cable |
| 109 | |
to the Leg Press Frame (28) with an M8 x 86mm |
| 37 | |
Shoulder Bolt (37) and an M8 Nylon Locknut (91). |
| ||
| 12 |
|
