1.
To make assembly easier, read the information on page 5 before you begin assembling the elliptical exerciser.
While another person lifts the Base (1), attach the Front Stabilizer (6) to the Base with two M10 x 80mm Carriage Bolts (82) and two M10 Nylon Locknuts (81).
2.Remove the indicated screw and the shipping bracket from the Base (1). Discard the screw and the shipping bracket.
Next, turn the Base Foot (26) into the Base (1) as far as possible.
3.Attach the Rear Stabilizer (7) to the Frame (2) with two M10 x 127mm Button Screws (83).
Next, hold the handle on the Frame (2), press the Latch Button (68), and lower the Frame until the Rear Stabilizer (7) is resting on the floor.
1 | 82 |
|
|
| |
|
| 81 |
| 6 |
|
| 81 | 1 |
|
| |
2 |
|
|
| 1 |
|
|
| Shipping |
|
| Bracket |
| 26 |
|
| Screw |
|
3 | 83 |
|
|
| |
| 7 |
|
| Handle |
|
|
| 2 |
|
| 68 |
6
