1.
To make assembly easier, read the information on page 4 before you begin assembling the exercise cycle.
Identify the Front Stabilizer (9), which is shorter than the Rear Stabilizer (not shown). While another person lifts the front of the Frame (1), attach the Front Stabilizer to the Frame with two M8 x 75mm Button Screws (44), two M8 Split Washers (66), and two M8 x 19mm Washers (65).
2.Orient the Seat Rail (2) as shown. Attach the Foot (17) to the underside of the Seat Rail with an M8 x 15mm Screw (42).
3.Attach the Rear Stabilizer (10) to the Seat Rail (2) with two M8 x 75mm Carriage Bolts (43), two M8 x 19mm Washers (65), two M8 Split Washers (66), and two M8 Acorn Nuts (29).
4.Orient the Seat Carriage (3) as shown. Slide the Seat Carriage onto the Seat Rail (2), and then tighten the Seat Carriage Knob (31) into the Seat Carriage and an adjustment hole in the Seat Rail. Make sure the Seat
Carriage Knob is engaged in one of the adjustment holes.
5
1 |
|
|
66 | 65 |
|
44 |
|
|
66 |
|
|
44 |
|
|
65 | 1 |
|
|
| |
| 9 |
|
2 |
|
|
| Adjustment Holes | |
| 2 |
|
| 17 |
|
| 42 |
|
3 |
|
|
| 2 |
|
| 29 | 66 |
|
| |
| 29 | 65 |
|
| |
| 66 |
|
| 65 |
|
| 10 | 43 |
|
| |
4 |
|
|
| 31 |
|
3 | 2 | Adjustment |
| ||
| Holes | |
|
| |
