5.Slide the Press Upright (3) onto the indicated 5/16Ó x 2 1/2Ó Carriage Bolts (22) in the Press Base (4). Tighten a 5/16Ó Nylon Locknut (68) onto each Carriage Bolt.
Note: The Press Upright (3) must be leaning towards the center of the unit with the two brackets oriented as shown.
6.Slide the Butterfly Upright (2) onto the indicated 5/16Ó x 2 1/2Ó Carriage Bolts (22) in the Butterfly Base (8). Hand tighten a 5/16Ó Nylon Locknut (68) onto each Carriage Bolt.
Do not tighten the Nylon Locknuts yet.
Note: The Butterfly Upright (2) must be oriented as shown with the bracket pointed towards the center of the unit.
5 |
Bracket |
Bracket |
3 |
68 |
68 |
4 |
22 |
6 |
2 |
68 |
Bracket |
68 |
8 |
22 |
6
