ProForm pftl101110.0 user manual Assembly, Make sure that the power cord is unplugged

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the pack- ing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walk- ing belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lu- bricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key		and your own Phillips screwdriver	, rubber
mallet	, and adjustable wrench	.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assem- bly. Extra hardware may be included.

3/8" Nut (20)–2	5/16" Star	3/8" Star	5/16" Base Extension
	Washer (110)–4	Washer (67)–4	Nut (91)–4
#8 x 3/4" Screw	#8 x 1" Tek Screw		#8 x 2 1/4" Screw (63)–4
(7)–6	(82)–8
3/8" x 1 1/4" Bolt	3/8" x 1 3/4" Bolt		5/16" x 2" Bolt (87)–4
(72)–4	(109)–2

1.	Make sure that the power cord is unplugged.	1
	With the help of a second person, carefully tip
	the treadmill onto its side as shown. Partially fold			Bracket
	the Frame (55) so that the treadmill is more sta-				85
	ble. Do not fully fold the Frame until the
	treadmill is completely assembled.	87		110
	Insert a Base Extension (97) into the indicated
	bracket on the base of the Uprights (85). Make
	sure that the Base Extension is turned so the
	Base Foot (81) is on the side shown. If neces-				91
	sary, use a rubber mallet to align the holes in the
	Base Extension with the holes in the bracket.			97
	Attach the Base Extension (97) with two 5/16" x		81
	2" Bolts (87), two 5/16" Star Washers (110), and
	two 5/16" Base Extension Nuts (91) as shown.	55
	Firmly tighten the Bolts.
		7