1. Make sure that the power cord is unplugged. | 1 | 77 | Hole |
|
With the help of a second person, carefully tip |
| |||
the treadmill onto its left side. Partially fold the |
| 85 |
|
|
Frame (48) so that the treadmill is more stable; |
|
|
| |
do not fully fold the Frame yet. | 48 |
|
|
|
Cut the tie securing the Wire Harness (77) to the |
|
|
| |
Base (85). Next, locate a tie in the indicated hole |
|
|
|
|
in the Base, and use the tie to pull the Wire |
|
|
|
|
Harness out of the hole. |
|
|
|
|
2. Attach two Base Pads (81) to the Base (85) in | 2 |
|
|
|
the locations shown with two M4.2 x 25mm Tek |
|
|
| |
Screws (2) and two Base Pad Spacers (74). | 85 |
| 81 |
|
Attach the other two Base Pads (81) with only |
| 2 | ||
two M4.2 x 25mm Tek Screws (2). |
|
|
|
74 | 81 2 |
| 81 2 |
74 | 812 |
7
