SuperTrak EX4350 Quick Start Guide

Note

The SuperTrak EX4350 RAID Controller card is a PCI Plug-n-Play (PnP) device. No changes are necessary in the motherboard CMOS/BIOS Setup for resources or drive types in most applications.

Step 2: Install the SuperTrak EX4350 Card

The SuperTrak EX4350 card fits into any available 3.3-volt PCI-Express X4 slot. You can also plug the SuperTrak card into a PCI-Express X8 or X16 slot.

1.Remove the cover of your system.

2.Remove the inside slot cover of an available PCI-Express slot on the motherboard.

3.Install the SuperTrak card into the open slot (see above).

4.Fasten the SuperTrak card bracket to the system case (see above).

4

Page 4
Image 4
Promise Technology quick start Install the SuperTrak EX4350 Card