Step 1: Unpack Your SuperTrak
3
SuperTrak Installation Task List• Step 1: Unpack Your SuperTrak, below
• Step 2: Install the SuperTrak EX4350 Card (page4)
• Step 3: Install the Disk Drives (page5)
• Step 4: Create a Logical Drive (page6)
• Step 5: Install Software Drivers (page10)
• Step 6: WebPAM Installation (page10)
Step 1: Unpack Your SuperTrak
When you receive the SuperTrak Serial ATA (SATA) RAID Controller card, the
package should contain the items listed below:
• SuperTrak EX4350 Controller card
•
Quick Start Guide
• Four 1.0m (39-inch) SATA disk drive data cables
• Two Y power splitter cables
• CD with Drivers, Web-Based Promise RAID Management (WebPAM)
software,
SuperTrak EX4350 User Manua
l
If any of the items are missing or appear damaged, please contact your dealer or
distributor immediately.
Warning
The electronic components on the SuperTrak RAID Controller
card are sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
SuperTrak card or its subassemblies.
Warning
Before installing the adapter into an existing system, backup any
important or useful data. Failure to follow this accepted PC
practice could result in data loss.