Chapter 1: Introduction to SmartStor
•SmartSYNC Backup Utility
•Setup Wizard Utility
Specifications
•Disk drive support:
•Four 1.5 Gb/s or 3 Gb/s SATA
•Conforms to Serial ATA 1.0 specification and Serial ATA II: Extensions to Serial ATA 1.0 specification (SATA II, phase I specification)
•SATA specification of 3 Gb/s transfers with CRC
•
•Tagged command queuing
•Native command queuing
•Drive roaming among channels
•S.M.A.R.T. status polled every 15 minutes
•Online capacity expansion
•RAID Level Migration
•Hot spare drives
•RAID Volume rebuilding
•Gigabyte rounding
•Background rebuilding
•RAID level support: RAID 0, 1, 5, and 10
•Large file system support up to 4 TB
•Unicode file name support
•SATA RAID Controller: Promise PDC40719
•Server on a Chip: Freescale MPC8343, 400MHz
•Networking: 10/100/1000 Mb/s Ethernet Port on motherboard
•USB ports: USB 2.0, up to 480 Mb/s, two
•File protocols: SMB, CIFS, FTP, AFP, NFS
•Flash Memory: 16 MB,
•Memory: 128 MB DDR SDRAM
•Power Supply:
•Network Time Protocol (NTP) client
•Error logging
•Phone home capability (email notification) to contact IT staff
3